15Using the phone
3. Using the phone
Note
Your phone will automatically time the duration of all external calls, the call timer
will display on the screen. When the call ends, the total duration of your talk time
is shown for 1 second.
3.1 Inserting the SIM
Make sure the phone is turned o (see below) and not connected to the power
when you insert or remove the SIM card. Do not touch the metal plate area of the
SIM card and keep away from electromagnetic fields.
3.2 Switch the handset on / o
1. Press and hold o for 3 seconds to switch the handset on / o.
2. Once turned on the phone will search for the network. After the phone is
registered to the network, the signal will be displayed at the top left corner of
the screen. The phone is now in standby and you can make or answer a call.
Your phone remains in a searching state if it fails to find the available network.
3.3 Calls
3.3.1 Make a call
1. Lift the handset or press
h to make a hands-free call.
2. Dial the number .If you make a mistake press
Clear
to delete the last digit.
Either press
c to dial or it will dial automatically after a set time. To set the
time for automatic dialling, see “Delay dial” on page 45.
3.3.2 Preparatory dialling
1. Dial the number first. If you make a mistake press
Clear
to delete the last digit.
2. Lift the handset or press
h to dial.
3.3.3 Make a call using speed dial keys
1. Press and hold the relevant keypad number to dial the pre-stored number
directly.
Note
Key 1 will automatically be assigned with the voicemail number for your
network provider.
Make sure the speed dial memory is set to on, see “Turn the speed dial memory
on/o” on page 19.
To assign a speed dial number, see “Store a speed dial memory number” on page
19.
3.3.4 End a call
Either press
End
, place the handset back on the base or press h to end a hands-
free call.
To Next Page
Loading...
Need help?
General
