Motorola FW200L - Getting Started; Underside of the Base and Inserting the SIM

7Getting started
1. Getting started
Important
Do not place your FW200L in the bathroom or other humid areas.
Signal strength
The
icon on your display indicates that you have a strong signal. When the
signal strength reduces the number of bars reduces.
If you are on a call, the line will hang up if the base loses signal.
Underside of the base and inserting the SIM
A Antenna
B Base curly cord socket
Plug the curly cord with the longer straight section and hook the cord into the
cord track.
C Microphone
D Battery compartment
E SIM card slot
F SIM bracket
G Battery plug socket
H Handset curly cord socket
Plug the curly cord with the shorter straight section into the handset.
A
B
C
D
E
H
F
G
1. Place the SIM
card so that the
bottom of the
SIM lines up
with the SIM
bracket (F).
2. Using your
finger slide the
SIM card down
until it won’t go
any further.