8 Getting started
Note
Once the SIM card is installed, place the battery in (D) and plug the battery wire
into (G) and then replace the battery cover.
Connecting the base to a PC / Charging the battery
1. Plug the USB cable into socket (A) on the side of the base.
2. Insert the other end into either (a) an AC adapter and connect to the wall
socket or (b) an active computer USB port.
3. The battery symbol on the display will scroll while charging and
will be
displayed once the battery is fully charged.
Note
You do not need to have the battery installed for the phone to work. If the battery
is not installed plug the base into a power source, the
icon will be displayed
instead of the battery symbol.
Battery low warning
If you hear a warning beep every 30 seconds during a call or every 3 minutes in
standby, you will need to recharge the battery or plug the phone into a power
source before you can use it again.
Battery performance
In ideal conditions, a fully charged battery should give up to 8 hours talk time or
up to 7 day standby time on a single charge.
1
Note that a new battery does not reach the full capacity until it has been put to
normal use for several days.
Running the battery right down at least once a month will help it last as long
as possible.
The charge capacity of the rechargeable battery will reduce with time as it wears
out, giving less talk / standby time. Eventually it will need to be replaced.
After charging your phone for the first time, subsequent charging time is about
6–8 hours a day. The battery and phone may become warm during charging. This
is normal.
1
All talk and standby times are approximate and depend on features selected and
usage pattern.
A
(a) (b)
To Next Page
Loading...
Need help?
General
