44 Settings
4.
Blacklist
is highlighted. Press
OK
.
5. Scroll
d to
Blacklist numbers
and press
OK
.
6. The blacklist numbers stored will be listed (only the first 3 are visible).
7. Scroll
d to the next available space and press
Edit
.
8. Using the keypad type in the number you want to block and press
Options
.
9. Press
Done
to save or
Cancel
return to the previous screen without saving.
10. Press
o to return to standby.
Note
This feature is network service dependent.
Turning the blacklist feature on / o
1. Press
Menu
, scroll d to
Settings
and press
OK
.
2. Scroll
d to
Call settings
and press
OK
.
3. Scroll
u to
Advanced settings
and press
OK
.
4.
Blacklist
is highlighted. Press
OK
.
5.
Reject numbers in blacklist
is highlighted. Press
OK
.
6. The current setting is highlighted, scroll to either
On
or
O
and press
OK
to confirm.
7. Press
o to return to standby.
8.2.6 Call time reminder
You can set the FW200L to give a reminder beep after a set amount of time
during a call. This can be set to o, to give a single beep or to beep periodically
during calls.
1. Press
Menu
, scroll d to
Settings
and press
OK
.
2. Scroll
d to
Call settings
and press
OK
.
3. Scroll
u to
Advanced settings
and press
OK
.
4. Scroll
d to
Call time reminder
and press
OK
.
5. The current setting is highlighted, scroll
u or d to select either
O
,
Single
or
Periodic
.
If
Single
is selected, using the keypad set the time you want the reminder to
beep between 1 and 3000 seconds. Once activated, during a call you will here
the beep once at the requested time.
If
Periodic
is selected, using the keypad set the time you want the beep to
activate between 30 to 60 seconds. Once activated, during a call you will
hear the beep at the set time and then again when the set time comes around
again. E.g if it is set to 40 seconds, you will hear a beep at 40 seconds,
then again at 80 seconds and then again at 120 seconds, this will continue
throughout the call.
6. Press
o to return to standby.
To Next Page
Loading...
Need help?
General
