14 - 6 Symbol LS2208 Product Reference Guide
Special Commands
Pause Duration
This parameter along with the Send Pause parameter on page 14-24 inserts a pause in the data transmission. To
set the pause scan a two-digit number (i.e., two bar codes), to represent a 0.1 second interval. For example, scan
bar codes 0 and 1 from Appendix D, Numeric Bar Codes to insert a 0.1 second pause; scan 0 and 5 for a 0.5
second delay. To correct an error or to change a selection, scan Numeric Cancel on page D-3.
Pause Duration
Begin New Rule
Scan this bar code to start entering a new rule.
Save Rule
Scan this bar code to save the rule you entered.
To Next Page
Loading...
Need help?
General
