2 - 16 MC1000 with Windows CE 5.0 Integrator Guide
2. Scroll up to Settings and press ENT. The Control Panel appears.
3. Scroll to the PC Connections icon and press ENT. The PC Connection window appears.
Figure 2-15 PC Connection Window
4. Press TAB to highlight on the Change Connection... button.
5. Press ENT. The Change Connection window appears.
Figure 2-16 Change Connection Window
6. Use the scroll up or down keys to select: USB Default.
7. Press ENT to exit the Change Connection window.
8. Press F - TAB.
9. Press ENT to exit the PC Connection window and ENT to exit the Control Panel window.
10. Ensure that ActiveSync is installed on the host computer and a partnership is established, see Setting Up an
ActiveSync Connection on the Host Computer on page 3-2.
11. Start ActiveSync if it is not running on the host computer. To start, select Start > Programs > Microsoft
ActiveSync.
To Next Page
Loading...
