ActiveSync 3 - 3
4. Select the Show status icon in Taskbar check box.
5. Click OK to save any changes made.
Setting up a Partnership
After ActiveSync installation is complete, the ActiveSync Setup Wizard sets up a partnership to synchronize
information between the mobile computer and host computer and customize synchronization settings.
To set up a partnership:
1. If the Get Connected window does not appear on the host computer, select Start > Programs > Microsoft
ActiveSync > File > Get Connected.
Figure 3-3 Get Connected Window
2. Connect the mobile computer to the host computer using the appropriate connection. See Chapter 2,
Accessories for accessory setup.
3. On the host computer, select Next in the Get Connected window. The host computer and the mobile computer
attempt to synchronize. The New Partnership window appears.
Figure 3-4 New Partnership Window
4. Click the Standard partnership radio button and then select Next. The New Partnership/Specify how to
synchronize data window appears.
To Next Page
Loading...
