3 - 6 MC1000 with Windows CE 5.0 Integrator Guide
Figure 3-9 ActiveSync Connected Window
The first synchronization copies information stored on the host computer to the mobile computer. When the copy is
complete and all data is synchronized, disconnect the mobile computer from the host computer, if desired.
For more information about using ActiveSync, start ActiveSync on the host computer, then see ActiveSync Help.
NOTE Perform the first ActiveSync operation a local, direct connection. To retain partnerships after a cold boot,
capture partnership registry information in a .reg file and save it in the Flash File System. Detailed
information is provided in the SMDK Windows CE Help File for Zebra Mobile Computers. See Chapter 4,
Software Installation on Development PC for the SMDK installation.
To Next Page
Loading...
Need help?
General
