6.
You will now have to
calibrate your touchscreen
and stylus by tapping the screen on the
crosshairs. Follow the instructions on the screen. After calibrating, press Enter to continue.
7.
The reboot is NOT complete yet!!!
The handheld will display a Windows desktop however the
reboot program is still running.
8.
BE PATIENT!!!
After about
2 or 3 minutes
the handheld screen will change and will display a
Warm Boot message. You may see a list of files scroll by. This is normal.
9.
The reboot is complete when the desktop includes a RetailData icon
. This is the collection
program but the setup is NOT complete.
10.
You will need to set your handheld’s internal date and time.
Double tap on the time in the lower right corner to bring up the
date/time settings.
To Next Page
Loading...
