Basic Operations
This chapter explains the operations to get you started on
using the radio.
Powering Up the Radio
Follow the procedure to power up your radio.
Press the On/Off button.
If successful:
• A tone sounds.
• The green LED lights up.
• The display screen lights up.
If the Tones/Alerts function is disabled, there is no tone
upon powering up.
Check your battery if your radio does not power up. Make
sure that it is charged and properly attached. Contact your
dealer if your radio still does not power up.
Resetting the Radio
You can force a radio reset if your radio is locked, and
unresponsive to button presses. Follow the procedure to
reset your radio.
Press and hold the On/Off button for at least seven
seconds.
Powering Off the Radio
Follow the procedure to power off your radio.
Press and hold the On/Off button.
The radio may take up to seven seconds to
completely turn off.
Adjusting the Volume
Follow the procedure to change the volume level of your
radio.
Do one of the following:
• Press the Volume Up button to increase the
volume.
English
Send Feedback 19
To Next Page
Loading...