Turning Horns/Lights On or Off
Your radio is able to notify you of an incoming call through
the horns and lights feature. When activated, an incoming
call sounds the horn and turns on the lights of your vehicle.
This feature needs to be installed through your radio rear
accessory connector by your dealer. Follow the procedure
to turn all horns and lights on or off on your radio.
Press the programmed Horns/Lights button.
If successful:
• The Positive Indicator Tone sounds.
• Horns and Lights feature is on.
If unsuccessful:
• The Negative Indicator Tone sounds.
• Horns and Lights feature is off.
Squelch Levels
You can adjust the squelch level to filter out unwanted calls
with low signal strength or channels with noise higher than
normal background.
Normal
This is the default setting.
Tight
This setting filters out unwanted calls and/or
background noise. Calls from remote locations may also
be filtered out.
Setting Squelch Levels
Follow the procedure to set the squelch levels on your
radio.
Press the programmed Squelch button.
One of the following tone sounds:
Positive Indicator Tone
Radio is operating in tight squelch.
Negative Indicator Tone
Radio is operating in normal squelch.
Voice Operating Transmission
The Voice Operating Transmission (VOX) allows you to
initiate a hands-free voice-activated call on a programmed
channel. The radio automatically transmits, for a
English
50 Send Feedback
To Next Page
Loading...