Making Private Calls
Your radio must be programmed to initiate a Private Call. If
this feature is not enabled, a negative indicator tone
sounds when you initiate the call. Follow the procedure to
make Private Calls on your radio.
Use the Text Message or Call Alert features to contact an
individual radio. For more information, see Text Messaging
on page 45 or Call Alert Operation on page 40.
1 Do one of the following:
• Select a channel with the active subscriber alias
or ID.
• Press the programmed One Touch Access
button.
2 Press the PTT button to make the call.
The green LED lights up.
3 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
4 Release the PTT button to listen.
The green LED blinks when the target radio
responds.
5
If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating
the channel is free for you to respond. Press the PTT
button to respond to the call.
The call ends when there is no voice activity for a
predetermined period.
Responding to Private Calls
Follow the procedure to respond to Private Calls on your
radio.
When you receive a Private Call:
• The green LED blinks.
• Your radio unmutes and the incoming call sounds
through the speaker.
1
If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
English
Send Feedback 33
To Next Page
Loading...