Test Call-Out
A special Call-Out alert that is sent by the dispatcher to test this feature. On receiving the Test Call-
Out, the radio plays a tone and displays Test Call-Out. To respond and clear the alert, press
the Test OK Soft key.
5.3.2
Call-Out Modes Interaction
Call-Out feature operation is different in other modes:
TXI Mode
You can receive Call-Out messages. The Call-Out alert message is displayed on the screen. You
have the option to exit TXI Mode or exit the Call-Out prompt.
• Exit TXI - Your radio exits TXI mode and prompts you to accept or reject the Call-Out message.
• Exit Call-Out - Your radio exits the Call-Out message and returns to TXI mode.
TMO
Call-Out is supported.
DMO
Call-Out is supported.
Emergency Mode
All Call-out alerts are ignored.
5.3.3
Call-Out Service Phases
In the Call-Out mode there are following phases:
Alerting Phase
The radio receives a Call-Out message. An alarm tone indicates the message. When the text is
displayed, you have the following options:
• Accept
• Reject
• Menu
NOTICE: If your service provider allowed it, you can stop the alert tone by pressing any key.
Information Phase
You are still in the Call-Out mode and you can receive more detailed information about the incident
that occurred through subsequent text or a voice message. You can query for more information
using voice group call or Call-Out text function which enables you to send a text message.
Depending on the settings configured by your service provider, you are able to respond to a Call-Out
by:
Free text
Type a response.
Pre-coded message
Select from a list of predefined replies.
5.4
Global Navigation Satellite System (GNSS) Location Service
NOTICE: This is a Software Selling Feature.
68015000797-EH
Chapter 5: Features
119
To Next Page
Loading...
