5 Radio displays a list of the numbers (including the senders number).
6 Highlight the required number and press Store.
7 Highlight required contact and press View.
NOTICE: To store a number for a new contact, select [New Contact] and fill out the
required fields. Press Done to save it.
8 Select Edit.
9 Choose the Type of the new number and press Done.
4.3.2.6
Calling Numbers from Messages
The Embedded Number feature is enabled by your service provider. You can return a voice call to the
sender of a message or to any number that is embedded in the message text.
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
The radio displays a list of numbers, including the number of the sender.
5 To call, select the required number and do one of the following:
• Press the PTT button.
• Press the Send key.
6 Press Ctype to select one of the following type of calls:
• Private
• Phone
• PABX
7 Do one of the following to initiate the call:
• Press the PTT button.
• Press the Send key.
4.3.2.7
Making Group Calls on the Talkgroup of the Message Sender
The Embedded Number feature is enabled by your service provider.
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Inbox.
3 Select the required message and press the PTT button.
68015000797-EH
Chapter 4: Main Menu
69
To Next Page
Loading...
