If… Then…
If you want to invoke the edit screen with
an old message and send it to a different
recipient,
perform the following actions:
a Select Forward and edit the text.
b To send, perform one of the following op-
tions:
• Select Send.
• Press the PTT button.
• Press the Send key.
If you want to refresh the list of messag-
es to display new messages,
select Refresh.
If you want to display the date and time
of the message when it is in one of the
following status:
• Sent
• Delivered
• Read
• Expired and undelivered
• Expired and unread
• Failed due to an unknown error,
select Delivery Status.
NOTICE: This option is only appli-
cable for the outbox.
If you want to protect the message and
avoid deleting or overwriting it,
select Protect.
If you want to remove the protection of
the message,
select Unprotect.
NOTICE: Message protection is
enabled in the inbox and Call Out
inbox. You can only delete unpro-
tected messages.
4.3.2.4
Embedded Number
The Embedded Number feature allows you to call a number embedded in the message in the Inbox or
Outbox folder. You can also start a group call with the message sender of a talkgroup.
4.3.2.5
Storing Numbers from Messages
Prerequisites:Embedded Number feature is enabled by your service provider.
When and where to use:You can save the number of the sender or embedded number from the
message to a new or existing contact.
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
68015000797-EH
Chapter 4: Main Menu
68
To Next Page
Loading...
