2.15
Over The Air Programming
NOTICE: This is a Software Selling Feature.
Over The Air Programming (OTAP) enables remote radio reconfiguration over TETRA network.
Prerequisites:Your radio display shows an OTAP prompt with Reboot required. Accept new
configuration? text for a new configuration update.
Procedure:
1 Select Yes to accept or No to reject the new configuration update.
NOTICE: A timer is set when the prompt is displayed. Request is automatically rejected if
there is no user response to the prompt when the timer runs out.
When the OTAP installation prompt is accepted, your radio updates with the new configuration as
received over OTAP. Visible indication guidance and update status is provided during the update.
When the OTAP installation prompt is rejected, your radio returns to idle mode.
2.16
One-Touch Buttons
The One-Touch Button (OTB) feature allows you to activate a feature by a long key press of the
programmable button. Your service provider can also assign one-touch functions to the keypad keys.
NOTICE:
The One-Touch Button and One-Touch Dial are mutually exclusive features.
Table 13: One-Touch Button Features
Feature Description
Activation of Covert Mode Turns Covert Mode on or off.
Any Network Selects any network.
Any Talkgroup Network Selects any talkgroup network.
Change Audio Profile Changes to the specific audio profile.
Change Talkgroup Changes the talkgroup to the one programmed by your service pro-
vider.
Display Heart Rate Displays the heart rate value received from the connected GATT-
based heart rate sensor.
DMO Pre-emptive Short
Data Service (SDS)
Sends the next DMO SDS or status message with elevated priority.
Flip Display Rotates the display by 180°.
Home Only Selects only home network.
Home Talkgroup on Home
Network
Selects only home network and home talkgroup network.
68015000797-EH
Chapter 2: Getting Started
39
To Next Page
Loading...
