• On – To activate this feature.
• Off – To deactivate this feature.
4.7.8
Time and Date
This sub-menu controls the displayed time and date on the home screen.
The Time and Date feature is triggered by the One-Touch Button.
NOTICE: Infrastructure synchronizes the time and date. When not within the infrastructure
signal range you can set the values manually.
4.7.8.1
Setting the Time Format
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Time & Date→Format→Format Time.
3 Select one of the following options:
• 12-Hour – Displays the time with am (before noon) or pm (after noon) indication.
• 24-Hour – Displays the time in 24 hour format.
4.7.8.2
Setting the Time Manually
When and where to use:If the time cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Time & Date→Set→Set Time.
3 Enter current time using Navigation keys or keypad.
4 Press Done.
4.7.8.3
Setting the Date Format
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Time & Date→Format→Format Date.
3 Select (D – day, M – month, Y – year):
• DD/MM/YY
• MM/DD/YY
• DD-MON-YY
• YY/MM/DD
68015000797-EH
Chapter 4: Main Menu
96
To Next Page
Loading...
