2 Select Setup→Tones→Periodic Alert.
3 Select one of the following options:
• Alert – Activates/deactivates periodic tone.
• Period – Indicates the time between each periodic tone.
4.7.6.6
D-PTT Tones
This menu item contains the settings for the Double PTT feature.
The Double PTT feature allows you to send a tone pattern (single, double, or triple) when the radio is in
idle or the Group Call mode by pressing the PTT button twice.
After the D-PTT tone is played, you can press and hold the PTT button once again to get the
permission to talk. Otherwise, if you press the PTT button while the D-PTT tone is played, it is ignored.
After the D-PTT tone is sent, keeping the PTT button pressed results in permission to talk.
The D-PTT tone is sent over the air but is not audible on the sending radio.
4.7.6.6.1
Setting D-PTT Tones
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Tones→D-PTT Tones.
3 Select one of the following options:
• D-PTT Mode – Activates/deactivates D-PTT tone.
• Tone Style– Indicates how many times the D-PTT tone is played.
4.7.7
Display
This menu item allows you to adjust your radio display settings.
4.7.7.1
Setting Flip Display
When and where to use:
The feature is useful for a user who has to wear the radio on a shoulder, belt, or lapel and at the same
time wishes to read the display upside down.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Display→Flip Display.
3 Select one of the following options:
• On – To activate this feature.
• Off – To deactivate this feature.
68015000797-EH
Chapter 4: Main Menu
93
To Next Page
Loading...
