4.6.1.2
Changing PIN Codes
NOTICE: This feature is only available when enabled by your service provider.
Procedure:
1 From the home screen, press the Menu key.
2 Select Security→Change Code.
3 Radio prompts for the Old Code.
NOTICE: By default the PIN code are all zeros (depending on the length of the PIN
code). For radios with general PIN authentication, the PIN length is a fixed 4-digit code.
For radios with BSI PIN authentication, the PIN length is configurable by your service
provider up to a maximum of 8-digit code.
4 If the entered code matches the old code, radio prompts for the new code twice.
Your radio displays Code Accepted.
4.6.2
Setting Keypad Lock
The keypad lock/unlock can be invoked from the radio menu, or by using a predefined menu shortcut.
By default, the Power and Emergency buttons are always operative when the keypad is locked.
Procedure:
1 To unlock, perform one of the following actions:
• Press Menu→*.
2 To lock, press Menu and select Security→Keylock Setup→Lock Keypad.
4.6.2.1
Keypad Lock Notification
When the keypad is locked, your service provider can configure one of the following instructions:
None
No notification is displayed.
Notification Only
Keys Locked is displayed.
Notification and Instruction
Press Menu * to lock/unlock keypad is displayed.
4.6.2.2
Setting Automatic Keylock Delay
Procedure:
1 From the home screen, press the Menu key.
2 Select Security→Keylock Setup→Delay.
3 Use Up and Down Navigation keys to change the minutes and press Done.
68015000797-EH
Chapter 4: Main Menu
82
To Next Page
Loading...
