2 To highlight the required contact, use Up and Down Navigation keys, or enter up to 12
characters of the contact name.
3 If the contact has more than one number, use Left and Right Navigation keys to select the
required number.
4 To initiate a simplex call, press the PTT button with a Private number. Otherwise use the Send
key to initiate a duplex call.
4.5
Browser
This menu item activates a WAP browser that allows you to browse the Internet from your radio. See
Wireless Application Protocol (WAP) on page 127.
4.6
Security
Security menu stores all your security settings.
4.6.1
PIN Protect
This feature allows you to enable/disable PIN code authentication at the next power on. This code
protects your radio against unauthorized use.
NOTICE: Customers are strongly advised to change the default PIN code in order to protect
devices from unauthorized access.
If you are unable to unlock the radio, you can only send or receive Emergency Calls and adjust the
volume level with the Volume Knob.
NOTICE: If the radio uses a BSI PIN code and you are unable to unlock the radio, you cannot
take any action.
4.6.1.1
Protecting the Radio with a PIN Code
Procedure:
1 From the home screen, press the Menu key.
2 Select Security→PIN Protect.
3 Select On.
4 Enter the PIN code.
NOTICE: To increase security, set your own PIN code. By default the PIN code are all
zeros (depending on the length of the PIN code). For radios with general PIN
authentication, the PIN length is a fixed 4-digit code. For radios with BSI PIN
authentication, the PIN length is configurable by your service provider up to a maximum
of 8-digit code.
Postrequisites:Each time you turn on the terminal, PIN code is required.
68015000797-EH
Chapter 4: Main Menu
81
To Next Page
Loading...
