The radio then displays all the different types
of lists enabled in the radio.
Press the key below SCAN to see if the mode
selected via the mode selector (3) and the
three-position toggle switch (6) is in the list.
Adding to the List:
Press the select button (7) if the scan icon
is not in the display, to include the mode as a
normal priority member.
Press the button again to make the mode pri-
ority 2 (the scan icon lights continuously).
Press the button a third time to make it a pri-
ority 1 mode (the dot in the scan icon
flashes).
Pressing the button again makes the mode
non-member (mode not included in the list).
Select a new mode via & until all
members have been added or deleted or
leave the function by pressing (14).
Deleting fr
om the List:
Pressing the select button (7), if one of the
scan icons is in the display, will upgrade the
priority of the mode. Press the select button
again until the mode disappears from the list.
Select a new mode, if needed, or leave the
function by pressing (14).
To Next Page
Loading...
Need help?
General
