the PTT or choose another number from the
list by using & .
Keypad Selection (List/Buf
fered Dialling)
(MTS 2000 III only):
Enter the desired number directly from the
keypad. If you are placing a call to a local
extension number requiring a pause before
the extension number, press (12).
Until the number is completed the last digit
may be erased using (13). Press repeat-
edly to erase the whole number. Then enter
the correct number.
When the number is complete, press the PTT
to transmit the call.
will be in the display, while the telephone sys-
tem is setting up the call.
If the PHONE system is busy, the display will
show
and your call will be placed when the system
is available, unless you press (14) to quit
Telephone Interconnect.
If phone access is unavailable to your radio,
the display shows
To Next Page
Loading...
Need help?
General
