The call alert page acknowledgement tone is
heard if the called radio receives the call alert
page. If the page is not received the display
will show
Press (14) to return to the home display.
Reprogram Request
If dynamic regrouping is programmed into
your radio, the reprogram request function
may be selected either via a pre-programmed
button or through a menu. A reprogram
request will send a message to the console
operator requesting that the operator assigns
the radio to a new talkgroup. See your sys-
tem administrator for further details.
Out of Range
If this optional function is programmed into
your radio, it will indicate when you have left
your radio coverage area. The display will
alternate between
and the current mode and the out of range
tone will sound.
SMARTZONE/AMSS FUNCTIONS
In SmartZone and AMSS (Automatic Multiple
Site Select) operation the two functions men-
tioned below may be programmed into your
radio:
To Next Page
Loading...
Need help?
General
