116 3E. Sprint Worldwide Wireless Service
Accessing Your Email and Data Services
on GSM/UMTS Networks
To access your email and browse the Web when
travelling, you may need to manually select the carrier
that provides Sprint service in your location. You can
find a list of carriers for each country where GSM data
service is offered at
www.sprint.com/sww
. Then, follow
the instructions below to select the appropriate carrier
network on your phone.
To select a GSM data service carrier for a specific country:
1.
Touch
>
Settings
>
Wireless & networks
>
Mobile networks.
2.
Under
Network mode
, select
Any GSM/UMTS
.
3.
Under
GSM/UMTS settings
, touch
Select network
and select a wireless network that supports Sprint
International GSM Data Roaming. If applicable,
touch
Operator selection
and select a specific
operator.
Accessing Your Email and Data Services
on CDMA Networks
If data service is available on a CDMA network, then
you only need to set the phone to CDMA; you will not
need to select the specific carrier. Selecting a specific
carrier is only necessary for providers on the GSM
network. If your device has automatically selected a
GSM network while travelling, then you will need to set
the phone to CDMA to access CDMA data services.
(See “Activating Global Roaming Mode” on page 112.)
Visit
www.sprint.com/sww
for a list of services available
in each country.
Understanding Status Messages
You may receive status messages under certain
conditions. Before contacting Sprint Worldwide
Customer Support, note the message, numeric code,
and the conditions under which it appeared. The
following table lists and describes the status messages.
Note:
Be sure you have the
Allow GSM Data
option checked.
To Next Page
Loading...
