2A. Phone Basics 27
Phone Basics
During a call, you will see a number of options. Touch
an option to select it.:
䢇
Add call: Put current call on hold and make a second
call.
䢇
Merge: Initiate a conference call.
䢇
End call: End the current call.
䢇
Dialpad/Hide: Toggle the appearance of the
on-screen dialpad.
䢇
Speaker: Route the device’s audio through the
speaker (On) or through the earpiece (Off).
䢇
Mute: Mute the microphone during an active call.
Touch again to unmute the microphone.
䢇
Bluetooth: Route the phone’s audio through a
connected Bluetooth
®
headset (On) or through the
speaker (Off). (First, turn on your phone and pair it.
See “Connecting New Devices” on page 67.)
䡲
When the call is routed to a Bluetooth headset,
the Bluetooth call icon is displayed on the
status bar.
䡲
To route the current call back to your phone,
touch
Bluetooth. Touch it again to route the call
back to the connected Bluetooth headset.
䡲
When Bluetooth or the Bluetooth headset is
turned off, the call is routed through either the
earpiece or the speaker and shows .
WARNING:
Because of higher volume levels, do not place
your phone near your ear during speakerphone
use.
Note:
Using a mobile device or accessory while driving may
cause distraction and may be illegal. Always obey the
laws and drive safely.
Your phone includes a proximity sensor. When you
hold the phone to your ear, the display goes dark to
prevent accidental touches. When you move your
phone away from your ear, the display lights up again.
Tip:
You can touch or to leave the active call display.
To reopen it, touch
>
> Return to call in
progress.
Note:
If Mute is activated, the speakerphone is deactivated.
To Next Page
Loading...
