Motorola Symbol LS1203 User Manual

1 - 2 Symbol LS1203 Product Reference Guide
following international keyboards (for Windows
®
environment): North America, German, French, French
Canadian, Spanish, Italian, Swedish, UK English, Portuguese-Brazilian, and Japanese.
Unpacking
Remove the scanner from its packing and inspect it for damage. If the scanner was damaged in transit, call
Motorola Enterprise Mobility Support. See page xiii for contact information. KEEP THE PACKING. It is the
approved shipping container and should be used if the equipment ever needs to be return for servicing.
Setting Up the Scanner
Installing the Interface Cable
To connect the interface cable:
1. Insert the interface cable’s modular connector clip into the cable interface port on the bottom of the scanner
handle. (See Figure 1-2.)
2. Gently tug the cable to ensure the connector is properly secured.
3. Connect the other end of the interface cable to the host. (See the specific host chapter for information on host
connections.)
Figure 1-2 Installing the Cable
Interface cable
modular connector
To host
Cable interface
port
Interface cable modular
connector clip
Interface cable
strain relief

Motorola Symbol LS1203 Specifications

General

Brand	Motorola
Model	Symbol LS1203
Category	Barcode Reader
Language	English