Getting Started 1 - 13
Accessories
The scanner and cradle accessories that are available separately include:
•
Intellistand for scanning in hands-free mode. For information about set up and use of Intellistand, see
Scanning in Hands-Free Mode on page 2-6.
•
Power supplies for applications that do not supply power over the host cable. See each host interface
chapter for set up information.
•
Wall-mount bracket for mounting the cradle vertically. Refer to the STB4208/4278 Cradle Quick Reference
Guide (p/n 72-71010-xx) for a wall mounting template and installation instructions.
•
Lanyard for wearing the scanner on a wrist.
Lanyard
The lanyard attaches to the inside of the scanner battery door latch.
Figure 1-10
Attached Lanyard
To attach the lanyard:
1. Open the battery door latch as described in Replacing the Scanner Battery on page 1-9. Do not remove the
battery.
To Next Page
Loading...
