Motorola Symbol LS4278 - Scanning in Hands-Free Mode; Assemble the Stand

2 - 6 Symbol LS4278 Product Reference Guide
Scanning in Hands-Free Mode
The optional Intellistand adds greater flexibility to scanning operation. When the scanner is seated in the stand’s
“cup,” the scanner’s built-in sensor places the scanner in hands-free mode. When the scanner is removed from the
stand, it automatically switches modes to operate in its normal hand-held triggered mode.
While in Intellistand, the scanner enters low power mode (Intellistand Idle Timeout) when no bar code is decoded
within 15 minutes. See Intellistand Idle Timeout on page 5-5 to set timeout intervals.
Assemble the Stand
Figure 2-5 Assembling Intellistand
NOTE When the scanner enters Intellistand Idle Timeout (low power mode in the stand), scanning capability
suspends. To restart scanning capability, press the trigger or remove the scanner and replace it into the
stand.