2 - 8 Symbol LS4278 Product Reference Guide
4. Present the bar code.
5. Upon successful decode, the scanner beeps and the LED turns green. For more information about beeper and
LED definitions, see Table 2-1 and Table 2-2.
NOTE When the bar code is in view, the scanner emits a full scan line. After a decode, the scan line blinks.
NOTE If no bar code is decoded after 15 minutes in the Intellistand, the scanner enters low power mode, or
Intellistand idle timeout. See Intellistand Idle Timeout on page 5-5 to set the Intellistand idle timeout
interval.
To Next Page
Loading...
