DataWedge
DataWedge is a utility that adds advanced bar code scanning capability to any application without writing code. It
runs in the background and handles the interface to built-in bar code scanners. The captured bar code data is
converted to keystrokes and sent to the target application as if it was typed on the keypad.
To configure DataWedge refer to the TC55 Integrator Guide.
Enabling DataWedge
Procedure:
1
Touch .
2
Touch .
3 Touch .
4 Touch Settings.
5 Touch the DataWedge enabled checkbox. A blue checkmark appears in the checkbox indicating that DataWedge
is enabled.
6
Touch
.
Disabling DataWedge
Procedure:
1
Touch
.
2
Touch .
3 Touch .
4 Touch Settings.
5 Touch the DataWedge enabled checkbox. The blue checkmark disappears from the checkbox indicating that
DataWedge is disabled.
6
Touch .
Data Capture | 105
MN000015A01 | September 2013
To Next Page
Loading...
Need help?
General