Motorola TC55 - Figure 112: Windshield Installation; Figure 113: Move Level Toward Windshield

Figure 112: Windshield Installation
2 Flip the lever down to create a vacuum between the suction cup and the mounting surface.
Figure 113: Move Level Toward Windshield
3 Make sure that the suction bond is strong enough before proceeding to the next step.
4 Place the TC55 top first into the cradle and push up.
5 Rotate the bottom into the cradle and place in the bottom of the cradle.
136 | Accessories
September 2013 | MN000015A01