Motorola TC55 - Calling a Person by Name; Dialing by Number; Figure 66: Voice Dialer Window; Opening an Application

Figure 66: Voice Dialer Window
The user says one of the following commands:
• Call
• Dial
• Redial
• Open.
Calling a Person By Name
Procedure:
1 Launch Voice Dialer.
2 Say “Call John Doe.”
3 In the Voice Dialer dialog box, touch Call John Doe
The call is initiated.
Redialing Previous Call
Procedure:
1 Launch Voice Dialer.
2 Say “Redial.”
3 In the Voice Dialer dialog box, touch Redial
The call is initiated.
Dialing By Number
Procedure:
1 Launch Voice Dialer.
2 Say “Dial (phone number).”
Note: Be careful not to say the number too fast or the application might not recognize what you are
saying.
3 In the Voice Dialer dialog box, touch the number that appears.
The call is initiated.
Opening an Application
Procedure:
1 Launch Voice Dialer.
2 Say “Open (application name).”
Applications | 81
MN000015A01 | September 2013