Motorola TC55 - Figure 103: Communication with NFC Chip, Tag or Card; Pairing with NFC Enabled Bluetooth Devices

Figure 103: Communication with NFC Chip, Tag or Card
3 Move TC55 to close to the NFC chip, tag or card until data transfer is complete (usually indicated by the
application).
Pairing with NFC Enabled Bluetooth Devices
Prerequisites: Ensure that the NFC-enabled Bluetooth devices is on and in discoverable mode. See the devices user
documentation.
Procedure:
1 Hold TC55 as shown. Do not cover antenna area on battery door.
126 | Wireless
September 2013 | MN000015A01