Motorola TC55 User Manual

Answering Calls with a Bluetooth Headset
When you receive a phone call, the Incoming Call screen opens, displaying the caller ID and any additional
information about the caller that is in the People application.
Figure 62: Incoming Call Screen
All incoming calls are recorded in the Phone application Call log tab. If you miss a call, you receive a notification. To
silence the ringer before answering the call, press the volume down button on the side of TC55.
When a call arrives, touch the Call button on the Bluetooth headset to answer the call..
To end the call press the Call button on the Bluetooth headset.
Call Settings
Use the Call Settings to modify options related to the phone call feature.
• Ringtone
- Phone ringtone - Touch to select a ringtone to sound when an incoming call is received.
- Vibrate when ringing - Check to make the TC55 vibrate when a call is received.
• Other Call Settings
- RingPath Settings - When using a Bucktooth headset, select the path that the ring is heard. Options:
Bluetooth or Speaker and Bluetooth (default). Note: Bluetooth headset connection is required to set this
option.
- Voicemail - Touch to configure voicemail settings.
+ Service - Set the service provider or other provider for voicemail service.
+ Setup - Touch to update the phone number used to access voicemail.
+ Ringtone - Touch to select a ringtone to sound when a voicemail is received.
+ Vibrate - Touch to select vibrate option. Options: Always, Only when silent or Never (default).
- Text message service center - Touch to update the phone number used to access text messages.
- Dial pad touch tones - Check to play a sound when a phone key is touched.
Calls | 75
MN000015A01 | September 2013

Motorola TC55 Specifications

General

Sealing	IP67
Durability	MIL-STD-810G
Operating System	Android
RAM	1 GB
Storage	8 GB
Display	4.3 inch
Connectivity	Wi-Fi, Bluetooth
Data Capture	1D/2D barcode scanner, 8 MP camera
Operating Temperature	-10° C to 50° C