18
English
Group Calls
A Group Call is a communication between you and others in a
group. A group is a pre-defined set of subscribers enabled to
participate in and/or invoke a Group Call.
A Talkgroup is a pre-defined set of subscribers enabled to
participate in and/or invoke a Group Call, that is set up by your
Service Provider.
Selecting a Talkgroup
You select a talkgroup from a list of pre-programmed Favorite
Groups, by using the Rotary Switch.
Rotate the Rotary Switch to the requested pre-programmed
talkgroup. The group attachment occurs for the new selected
talkgroup. You have access up to 10 talkgroups.
Entering TMO or DMO
Enter TMO or DMO in one of the following ways:
• Change groups using the Rotary Switch.
• Press the TMO/DMO Button.
You can make and receive the following types of calls in Trunked
and Direct Operation Modes:
• Group Calls
• Emergency Calls
TMO Group Calls
In TMO the TCR1000 is used with your Service Provider’s
infrastructure.
Making a TMO Group Call
1. In TMO, press and hold the PTT.
2. Wait for the talk permit tone and then speak into the microphone.
Release the PTT button to listen.
When you start a call, all members of the selected group who have
their units turned on, will receive the Group Call.
To Next Page
Loading...
Need help?
General
