4.17.1
TETRA Enhanced Data Services (TEDS)
NOTE: TEDS is model-specific and may not be available on your radio. Contact your service
provider for more information.
TETRA Enhanced Data Services (TEDS) is an enhancement of the Packet Data feature and allows for
increased speed of data transfer.
When TEDS is enabled, an appropriate icon is displayed in the status icon area. The icon is visible
even if an infrastructure does not support TEDS – in such a situation the data is transferred by using
the standard Packet Data.
4.17.2
Viewing Data Statistics
Procedure:
1 From the home screen, press the Menu key.
2 Select Packet Data.
NOTE: Data services are only available in TMO Mode.
The data option must be set to
Voice Data or Data Only.
3 Select one of the following options:
• Sent Data – The number of KBs sent and throughput since current Packet Data activation is
displayed.
• Received Data – The number of KBs received and throughput since current Packet Data
activation is displayed.
• Bandwidth – Active data session percentage is shown.
• Failed Transfer
– The percentage of failed sent/received packets.
NOTE: N.A. – Standby packet data session.
4.17.3
Viewing Encryption Status
Procedure:
1 From the home screen, press the Menu key.
2 Select More . . .→Packet Data→Encryption.
3 The encryption state of the ongoing packet data session is displayed:
• Packet Data Channel Clear
• Packet Data Channel Encrypted
• Encryption N/A (clear)
68015000180-MR
Chapter 4 : Main Menu
122
To Next Page
Loading...
Need help?
General