• Range
• RMS/FMS
•
Scan List Alias
• Secondary Talkgroup Alias
• Talkgroup Alias
• Time and Date
Order and visibility of these items are also subject of the Configurable Idle Screen settings.
2.8
Status Icons
Status icons appear when your radio is engaged in certain activities or when you have activated certain
features.
Table 10: Status Icons
Icon Description
Trunked Mode Operation (TMO)
In Service
No Service
Signal Strength – The more bars, the stronger the signal.
Migration – Indicates that the radio is registered to a foreign network.
Broadcast Call – Indicates that the radio is in a Broadcast Call.
Gateway Mode – Indicates that the radio is operating as a gateway in Gateway
Mode.
Scan – Indicates that talkgroup scanning is activated in the radio.
Packet Data or Multi-Slot Packet Data (MSPD) / TETRA Enhanced Data Services
(TEDS) – The more blue sections on the icon, the faster the data transfer. Possible
status:
• Four gray sections: context activated – data idle
•
One blue: Packet Data active
• Two blue: Multi-Slot Packet Data active
• Three blue: TEDS 25 kHz active
• Four blue: TEDS 50 kHz active
Direct Mode Operation (DMO)
Direct Mode Call – Indicates that the radio is receiving a Direct Mode call. The more
bars, the stronger the signal.
Direct Mode – Indicates that radio is in Direct Mode (radio-to-radio communication).
68015000180-MR
Chapter 2 : Getting Started
34
To Next Page
Loading...
Need help?
General