Figure 4: Communication through Repeaters
When the radio detects a potential repeater signal or connects to a repeater, it plays a tone,
displays the Repeater available message, and shows an appropriate icon. When the radio loses
connection with the repeater, it plays a tone, displays the Repeater not available message, and
the repeater icon is blinking.
3.3.11
Communication Through Gateways
Gateway provides connectivity between radios operating in Direct Mode Operation (DMO) and the
TETRA network, so that the DMO radios can communicate with radios operating in Trunked Mode
Operation (TMO).
Figure 5: Communication Through Gateways
Radio behavior when radio detects a potential repeater signal or connects to a gateway:
• Radio sounds a tone sounds.
•
Radio displays Gateway available.
• Radio displays an appropriate icon.
68015000180-MR
Chapter 3 : Modes
54
To Next Page
Loading...
Need help?
General