4.7.2
Set Volume
This menu item allows you to adjust Voice, Duplex, Simplex, Keypad, and Tones volume for the
Speaker and the Earpiece.
4.7.2.1
Setting Volume
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→
Set Volume.
3 Select Speaker or Earpiece.
4 Select one of the following options:
• Voice – Sets the volume level for voice.
• Duplex – Sets the volume level for duplex ringtones.
• Simplex – Sets the volume level for simplex ringtones.
• Keypad – Sets the volume level for keypad tones.
• Tones – Sets the volume level for alert tones.
NOTE: If the display shows only one option Volume, you can adjust all of the above
settings at once. You have the option to change the settings individually when the
Volume Adj. Mode is set to Individual.
5 Press Right or Left Navigation key to change the value.
4.7.3
Language
This sub-menu allows you to change the language of the radio.
4.7.3.1
Setting Language
Prerequisites: The list of available languages is set by service provider.
Procedure:
1 From the home screen, press the Menu key.
2 Select
Setup→Language.
3 Select desired language.
4.7.4
Data Setup
This menu item allows you to set up your radio to transmit and receive data from the external device.
To connect your radio accessory connector to the external device, use the PMKN4104 cable.
68015000180-MR
Chapter 4 : Main Menu
93
To Next Page
Loading...
Need help?
General