20 April 14, 2004 6809471A72-O
Disassembly V80
Disassembly
The procedures in this section provide instructions for the disassembly of a V80
telephone. Tools and equipment used for the phone are listed in Table 1, preceding.
Removing and Replacing the Battery Cover
1. Ensure the phone is turned off.
2. Press in and hold the battery cover latch as shown in Figure 4.
3. Lift the battery cover completely off the phone.
4. To replace, align the battery cover with the phone.
5. Slide the bottom end of the battery cover into position.
6. Press the top end of the battery cover onto the phone until the battery cover
latch is secure.
G
Many of the integrated devices used in this phone are vulnerable to damage from
electrostatic discharge (ESD). Ensure adequate static protection is in place when
handling, shipping, and servicing the internal components of this equipment.
G
Avoid stressing the plastic in any way to avoid damage to either the plastic or
internal components.
E
All batteries can cause property damage and/or bodily injury such as burns if a
conductive material such as jewelry, keys, or beaded chains touch exposed terminals.
The conductive material may complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any charged battery, particularly when
placing it inside a pocket, purse, or other container with metal objects.
020200o
Figure 4. Removing the Battery Cover
To Next Page
Loading...
