22 April 14, 2004 6809471A72-O
Disassembly V80
Removing and Replacing the Subscriber Identity Module (SIM)
1. Remove the battery housing and battery as described in the procedures.
2. Slide the SIM latch away from the SIM card to unlock as shown in Figure 6.
3. Carefully lift the SIM from its holder.
4. To replace, insert the SIM into the holder, ensuring the keyed corner of the
SIM aligns with the notch molded into the holder.
5. Lock the SIM into place by sliding the latch towards the SIM card.
6. Replace the battery and battery housing as described in the procedures.
040151o
Figure 6. Removing the SIM
SIM
SIM Latch
To Next Page
Loading...
