28 April 14, 2004 6809471A72-O
Disassembly V80
Removing and Replacing the Keypad
1. Remove the battery cover, battery, SIM, antenna, rear housing assembly, and
transceiver board assembly as described in the procedures.
2. Use the plastic tweezers to lift the keypad from the front housing as shown in
Figure 12.
3. To replace, insert the keypad into the front housing, ensuring the keys align
properly with the openings in the front housing.
4. Replace the transceiver board, rear housing assembly, antenna, SIM, battery,
and battery cover as described in the procedures.
040176o
Figure 12. Removing the Keypad
Keypad
To Next Page
Loading...
