19
Rain sensor
Mowing in the rain is not recommended.
The Robotic Mower has got a rain sensor and may prevent the robot from mowing in the rain. In the default
factory setting, the Robotic Mower returns back to the charging station if rain is detected, where it will continue
to charge. After charging it will stay in the charging station for a further 2 hours befor
e
resuming mowing.
Note: Do not short cut the two metal sensors with metal or other conductor. This will make the robot work
abnormally.
If you want the mower to work in the rain, you can change the default setting with reference to 5.4.2.
The Robotic Mower can cut wet grass - but wet grass will accumulate on the blade disc and wheels, and require
more frequent cleaning.
Do not use the Robotic Mower during lightning to avoid damage to the electronic circuits.
We strongly recommend unplugging the charging station and to disconnect the boundary
wire from the base station too.
5.4.3 Language
Step 1: Move the cursor to the general settings
, then press the OK key .
Step 2: Move the cursor to Language, then press
.
Step 3: Use
or to move the cursor to the desired language, press .
Step 4: On the pop-up message "Save it?", press the OK key
if you want to confirm the changes. If you don’t
want to save the changes, press
to return to the previous menu.
08-59-21 Mower
■English
Deutsch
Dansk
česky
Slovaščina
W Języku polskim
■Magyar
Fransais
Set Date and Time
Mow in the Rain
■Language
Secondary areas
Information
To Next Page
Loading...