34
17
The
Robotic
Mower is
very noisy.
None
cutting blades.
2. Cutting blade
is partially
blocked by
tapes, ropes,
plastic
fragments, etc.
3. The Robotic
Mower started
with obstacles
being too close
(less than 1 m
away - fallen
branches,
etc.).
4. Damaged
cutting motor or
driving motor.
5. Other
damages on the
parts of the
mower.
1. Replace all of the 3 blades together.
The Robotic Mower’s cutting efficiency depends on
sharp blades, so please keep them in good condition.
2. Stop the Robotic Mower safely, use protective
to avoid the risk of cuts to hands, remove the
debris/blockage from blades.
3. Get the motor repaired or replaced by the service
centre.
18
The
Robotic
Mower
stays on
the station
or the
mower
keeps
going back
to the
station
None
Wrong working
time setting.
Check the Working Time setting.
For example, if you set:
DAY Start Hours
Mon 8:00 3 hrs
This means on Monday the mower will be working from
8:00 AM to 11:00 AM. Outside of that time window, the
Robotic Mower will stay on the station or be travelling
to the charging station.
To Next Page
Loading...