Moxa Technologies MGate MB3000 Series - Specifications

MGate MB3000 User’s Manual Hardware: MB3170, MB3170I
6-7
Specifications
LAN
Ethernet
10/100 Mbps, RJ45, Auto MDI/MDIX
Protection
Built-in 1.5 KV magnetic isolation
Serial Interface
Interface
RS-232/422/485
No. of Ports
1 port
Connector Type
DB9 (male) for RS-232, terminal block for RS-422/485
Signals
RS-232:
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422:
Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire):
Data+, Data-, GND
RS-485 (4-wire):
Tx+, Tx-, Rx+, Rx-, GND
Serial Line Protection
15 KV ESD for all signals
RS-485 Data Direction
Patented ADDC™
Serial Communication Parameters
Parity
None, Even, Odd, Space, Mark
Data Bits
7, 8
Stop Bits
1, 2
Flow Control
RTS/CTS, XON/XOFF
Transmission Speed
50 bps to 921.6 Kbps
Software Features
Operation Mode
RTU Slave, RTU Master, ASCII Slave, ASCII Master
Utilities
MGate Manager
Multi-Masters and
Multi-Request
16 simultaneous TCP masters, 32 simultaneous requests for each TCP
master
Power Requirements
Power Input
12 to 48 VDC
Power Socket
Terminal block
Power Consumption
MB3170: 400 mA@12 VDC, 130 mA@48 VDC
MB3170I: 405 mA@12 VDC, 140 mA@48 VDC
Relay Output
1 digital relay output to alarm (normal close):
Current carrying capacity 1 A @ 30 VDC
Environment
Operating Temperature
0 to 55°C (32 to 13 1°F), 5 to 95%RH
-40 to 75°C (-40 to 167°F), 5 to 95%PH for “-T” models
Storage Temperature
-40 to 85°C (-40 to 185°F), 5 to 95% RH
Warranty
Period
5 years