MGate MB3000 User’s Manual Hardware: MB3270, MB3270I
Panel Layout
LED Indicators
PWR1 Red
Power is being supplied to the power input.
PWR2 Red
Power is being supplied to the power input.
RDY
Red
Steady on: Power is on and unit is booting up.
Blinking: Indicates an IP conflict, or DHCP or
not responding properly.
Green
Steady on: Power is on and unit is functioning normally.
Blinking: Unit is responding to software Locate function.
Power is off, or power error condition exists.
Ethernet
10 Mbps Ethernet connection.
100 Mbps Ethernet connection.
Ethernet cable is disconnected, or has a short.
P1, P2
Serial port is receiving data.
Serial port is transmitting data.
No data is being transmitted or received through the serial port.