To Next Page

To Previous Page

MGate MB3000 User’s Manual Configuring the Modbus Gateway

9-24

Miscellaneous Setup

This page identifies options that were not mentioned previously: Auto Relay Warning, Reset

Button Protect, Web Console, and Telnet Console.

Auto Relay Warning will be triggered in the event of a power failure or when Ethernet links are

disconnected. When a checked trigger condition occurs, the EIP3000 will open the circuit of the

relay output and trigger the Fault LED to start blinking. Otherwise, the EIP3000 will short circuit the

relay output.

Moxa Technologies MGate MB3000 Series User Manual

Questions and Answers: