Upgrading Firmware
Firmware updates for the MGate MB3000 are located at www.moxa.com. After you have
downloaded the new firmware onto your PC, you can use MGate Manager to write it onto your
MGate MB3000. Select the desired unit from the list in MGate Manager and click Upgrade
Firmware to begin the process.
The dialog boxes will guide you through the process. You will need to browse your PC for the
firmware file. Make sure that it matches your model.
As the firmware is written to the unit, progress is displayed in the window.
Once the firmware has been successfully written onto the unit, click Exit to close the Upgrade
Firmware window. MGate Manager will automatically execute a Broadcast Search for all MGate
MB3000 units on the LAN. Your MGate should reappear in the list of units.
To Next Page
Loading...
Need help?
General
