Moxa Technologies MGate MB3000 Series - Configuring the Modbus Gateway

9
9
Chapt er 9 Configuring the Modbus Gateway
We discuss the following topics in this chapter:
 Installing the Software
 Starting MGate Manager
 Change Language Setting
 Connecting to the Unit
 Broadcast Search
 Specify by IP Address
 Modifying the Configuration
 Configure Serial Port for RTU or ASCII, Master or Slave
 Configure IP Address and Other Network Settings
 Configure Serial Communication Parameters
 Set up Slave ID Mapping (Smart Routing)
 Customize Modbus Settings
 Set Up Priority Control
 Accessible IP
 Miscellaneous
 Verifying the Location of
the Unit
 Monitoring Modbus Activity
 Open Traffic Monitor Window
 Filter Traffic Information
 Save Log to File
 Upgrading Firmware