NPort 6000 Series Additional Serial Port Settings
Port Modem Settings
Modem settings are used for the Dial In/Out modes. These settings will have no effect on ports configured for
other modes.
Enable modem (default=Disable)
Initial string: Use this field to configure the initial string that the modem will use to establish the connection.
For example, AT&S0=1 for auto-answer.
Dial up: Use this field to configure the modem’s Dial-up AT command string.
Phone number: Use this field to configure the number that the user uses to dial out.
Port Cipher Settings
Serial Port Settings Port N Cipher Settings
Used to choose cipher priority for SSL and SSH to build secure connections. The Secure Mode (SSL/TLS)
Ciphers are for when secure mode is selected. The SSH/Reverse SSH Ciphers are only for SSH terminals
and Reverse SSH terminals.
To Next Page
Loading...
Need help?
General
